base system setup

This commit is contained in:
Tobias Strobel 2022-03-06 13:34:13 +01:00
parent 5d0ab1a9ae
commit 70c042bf6a
10 changed files with 596 additions and 6 deletions

View file

@ -36,9 +36,9 @@ output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
# Example configuration: # Example configuration:
# #
exec swayidle -w \ exec swayidle -w \
timeout 300 'swaylock -f -c d3d3d3' \ timeout 300 'swaylock -f -c 3c3c3c' \
timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \ timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
before-sleep 'swaylock -f -c d3d3d3' before-sleep 'swaylock -f -c 3c3c3c'
# #
# This will lock your screen after 300 seconds of inactivity, then turn off # This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when # your displays after another 300 seconds, and turn your screens back on when

1
etc/kernel/cmdline Normal file
View file

@ -0,0 +1 @@
rd.luks.name=a4a8535e-cd13-4656-8de3-5394281cb369=luks rd.luks.options=fido2-device=auto root=LABEL=btrfs rootflags=subvol=root rw quiet loglevel=3 rd.udev.log_level=3 fbconf=nodefer splash vt.global_cursor_default=0 mem_sleep_default=deep

View file

@ -1,4 +1,4 @@
MODULES=(i915) MODULES=(i915)
BINARIES=(/usr/bin/btrfs) BINARIES=(/usr/bin/btrfs)
FILES=() FILES=()
HOOKS=(base consolefont udev autodetect keyboard keymap modconf block encrypt filesystems fsck shutdown) HOOKS=(base systemd sd-plymouth keyboard autodetect sd-vconsole modconf block sd-encrypt filesystems fsck)

1
etc/modprobe.d/i915.conf Normal file
View file

@ -0,0 +1 @@
options i915 fastboot=1

View file

@ -1 +1,2 @@
# Allow members of group wheel to execute any command
%wheel ALL=(ALL:ALL) ALL %wheel ALL=(ALL:ALL) ALL

View file

@ -0,0 +1 @@
kernel.printk = 3 3 3 3

View file

@ -1,3 +1,3 @@
[Service] [Service]
ExecStart= ExecStart=
ExecStart=/usr/bin/agetty --autologin tobias --noclear %I $TERM ExecStart=/usr/bin/agetty --skip-login --nonewline --noissue --autologin tobias --noclear %I $TERM

346
install.sh Normal file
View file

@ -0,0 +1,346 @@
#!/usr/bin/env bash
#
# Arch Linux installation
#
# Bootable USB:
# - [Download](https://archlinux.org/download/) ISO and GPG files
# - Verify the ISO file: `$ pacman-key -v archlinux-<version>-x86_64.iso.sig`
# - Create a bootable USB with: `# dd if=archlinux*.iso of=/dev/sdX && sync`
#
# UEFI setup:
#
# - Set boot mode to UEFI, disable Legacy mode entirely.
# - Temporarily disable Secure Boot.
# - Make sure a strong UEFI administrator password is set.
# - Delete preloaded OEM keys for Secure Boot, allow custom ones.
# - Set SATA operation to AHCI mode.
#
# Run installation:
#
# - Connect to wifi via: `# iwctl station wlan0 connect WIFI-NETWORK`
# - Run: `# bash <(curl -sL https://link.rafe.li/dot)`
#
# WARNING: this script will destroy data on the selected disk.
#
set -uo pipefail
trap 's=$?; echo "$0: Error on line "$LINENO": $BASH_COMMAND"; exit $s' ERR
exec 1> >(tee "stdout.log")
exec 2> >(tee "stderr.log" >&2)
export SNAP_PAC_SKIP=y
# Dialog
BACKTITLE="Arch Linux installation"
get_input() {
title="$1"
description="$2"
input=$(dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --inputbox "$description" 0 0)
echo "$input"
}
get_password() {
title="$1"
description="$2"
while : ; do
init_pass=$(dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --passwordbox "$description" 0 0)
: "${init_pass:?dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --msgbox "Password cannot be empty.\nTry again." 0 0}"
test_pass=$(dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --passwordbox "$description again" 0 0)
if [[ "$init_pass" != "$test_pass" ]]; then
dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --msgbox "Passwords did not match.\nTry again." 0 0
else
break
fi
done
echo "$init_pass"
}
get_choice() {
title="$1"
description="$2"
shift 2
options=("$@")
dialog --clear --stdout --backtitle "$BACKTITLE" --title "$title" --menu "$description" 0 0 0 "${options[@]}"
}
echo -e "\n### Checking UEFI boot mode"
if [ ! -f /sys/firmware/efi/fw_platform_size ]; then
echo >&2 "You must boot in UEFI mode to continue"
exit 2
fi
echo -e "\n### Ensure the system clock is accurate"
timedatectl set-ntp true
hwclock --systohc --utc
echo -e "\n### Setting keyboard layout to de-latin1"
loadkeys de-latin1
echo -e "\n### Installing additional tools"
pacman -Sy --noconfirm --needed git reflector terminus-font dialog wget
echo -e "\n### HiDPI screens"
noyes=("Yes" "The font is too small" "No" "The font size is just fine")
hidpi=$(get_choice "Font size" "Is your screen HiDPI?" "${noyes[@]}") || exit 1
clear
[[ "$hidpi" == "Yes" ]] && font="ter-132n" || font="ter-716n"
setfont "$font"
hostname=$(get_input "Hostname" "Enter hostname") || exit 1
clear
: "${hostname:?"hostname cannot be empty"}"
user=$(get_input "User" "Enter username") || exit 1
clear
: "${user:?"user cannot be empty"}"
password=$(get_password "User" "Enter password") || exit 1
clear
: "${password:?"password cannot be empty"}"
devicelist=$(lsblk -dplnx size -o name,size | grep -Ev "boot|rpmb|loop" | tac | tr '\n' ' ')
read -r -a devicelist <<< "$devicelist"
device=$(get_choice "Installation" "Select installation disk" "${devicelist[@]}") || exit 1
clear
echo -e "\n### Setting up fastest mirrors"
reflector --country 'Germany,France,' --protocol https --sort rate --save /etc/pacman.d/mirrorlist
echo -e "\n### Setting up partitions"
umount -R /mnt 2> /dev/null || true
cryptsetup luksClose luks 2> /dev/null || true
lsblk -plnx size -o name "${device}" | xargs -n1 wipefs --all
sgdisk --clear "${device}" --new 1::-551MiB "${device}" --new 2::0 --typecode 2:ef00 "${device}"
sgdisk --change-name=1:primary --change-name=2:ESP "${device}"
part_root="$(ls "${device}"* | grep -E "^${device}p?1$")"
part_boot="$(ls "${device}"* | grep -E "^${device}p?2$")"
echo -e "\n### Formatting partitions"
mkfs.vfat -n "EFI" -F 32 "${part_boot}"
echo -n "${password}" | cryptsetup luksFormat --type luks2 --pbkdf argon2id --label luks "${part_root}"
echo -n "${password}" | cryptsetup luksOpen --allow-discards --persistent "${part_root}" luks
mkfs.btrfs -L btrfs /dev/mapper/luks
echo -e "\n### Setting up BTRFS subvolumes"
mount /dev/mapper/luks /mnt
btrfs subvolume create /mnt/root
btrfs subvolume create /mnt/home
btrfs subvolume create /mnt/pkgs
btrfs subvolume create /mnt/aurbuild
btrfs subvolume create /mnt/archbuild
btrfs subvolume create /mnt/docker
btrfs subvolume create /mnt/logs
btrfs subvolume create /mnt/temp
btrfs subvolume create /mnt/swap
btrfs subvolume create /mnt/snapshots
umount /mnt
mount -o noatime,compress=zstd,subvol=root /dev/mapper/luks /mnt
mkdir -p /mnt/{mnt/btrfs-root,efi,home,var/{cache/pacman,log,tmp,lib/{aurbuild,archbuild,docker}},swap,.snapshots}
mount "${part_boot}" /mnt/efi
mount -o noatime,compress=zstd,subvol=/ /dev/mapper/luks /mnt/mnt/btrfs-root
mount -o noatime,compress=zstd,subvol=home /dev/mapper/luks /mnt/home
mount -o noatime,compress=zstd,subvol=pkgs /dev/mapper/luks /mnt/var/cache/pacman
mount -o noatime,compress=zstd,subvol=aurbuild /dev/mapper/luks /mnt/var/lib/aurbuild
mount -o noatime,compress=zstd,subvol=archbuild /dev/mapper/luks /mnt/var/lib/archbuild
mount -o noatime,compress=zstd,subvol=docker /dev/mapper/luks /mnt/var/lib/docker
mount -o noatime,compress=zstd,subvol=logs /dev/mapper/luks /mnt/var/log
mount -o noatime,compress=zstd,subvol=temp /dev/mapper/luks /mnt/var/tmp
mount -o noatime,compress=zstd,subvol=swap /dev/mapper/luks /mnt/swap
mount -o noatime,compress=zstd,subvol=snapshots /dev/mapper/luks /mnt/.snapshots
echo -e "\n### Configuring custom repo"
mkdir "/mnt/var/cache/pacman/${user}-local"
# if [[ "${user}" == "maximbaz" && "${hostname}" == "home-"* ]]; then
# wget -m -nH -np -q --show-progress --progress=bar:force --reject='index.html*' --cut-dirs=2 -P "/mnt/var/cache/pacman/${user}-local" 'https://pkgbuild.com/~maximbaz/repo/'
# rename -- 'maximbaz.' "${user}-local." "/mnt/var/cache/pacman/${user}-local"/*
# else
repo-add "/mnt/var/cache/pacman/${user}-local/${user}-local.db.tar"
# fi
if ! grep "${user}" /etc/pacman.conf > /dev/null; then
cat >> /etc/pacman.conf << EOF
[${user}-local]
Server = file:///mnt/var/cache/pacman/${user}-local
[maximbaz]
Server = https://pkgbuild.com/~maximbaz/repo
[options]
CacheDir = /mnt/var/cache/pacman/pkg
CacheDir = /mnt/var/cache/pacman/${user}-local
EOF
fi
echo -e "\n### Installing packages"
kernel_packages=(
"linux"
"linux-headers"
"linux-lts"
"linux-firmware"
"intel-ucode"
)
fs_packages=(
"btrfs-progs"
"dosfstools"
"e2fsprogs"
)
network_packages=(
"iwd"
"systemd-resolvconf"
)
basic_packages=(
"man-db"
"man-pages"
"pacman-contrib"
"neovim"
"bash-completion"
"git"
"rsync"
"openssh"
"htop"
"fzf"
"sudo"
"pipewire"
"pipewire-pulse"
"pipewire-jack"
"wireplumber"
"firefox"
"firefox-i18n-de"
"firefox-ublock-origin"
"firefox-dark-reader"
"aurutils" # from maximbaz repo
"devtools" # tools for aurutils
"docbook-xls" # depenency of plymouth-git
"efitools" # provides KeyTool
"libfido2" # for systemd-cryptenroll
)
all_packages=(
${kernel_packages[@]}
${fs_packages[@]}
${network_packages[@]}
${basic_packages[@]}
)
pacstrap /mnt base base-devel arch-secure-boot ${all_packages[@]}
echo -e "\n### Generating base config files"
echo "cryptdevice=PARTLABEL=primary:luks:allow-discards root=LABEL=btrfs rootflags=subvol=root rw quiet mem_sleep_default=deep" > /mnt/etc/kernel/cmdline
genfstab -L /mnt >> /mnt/etc/fstab
echo "FONT=$font" > /mnt/etc/vconsole.conf
echo "KEYMAP=de-latin1" >> /mnt/etc/vconsole.conf
echo "${hostname}" > /mnt/etc/hostname
sed -i 's/^#en_US\.UTF-8/en_US\.UTF-8/' /mnt/etc/locale.gen
sed -i 's/^#de_DE\.UTF-8/de_DE\.UTF-8/' /mnt/etc/locale.gen
echo "LANG=en_US.UTF-8" > /mnt/etc/locale.conf
arch-chroot /mnt locale-gen
ln -sf /usr/share/zoneinfo/Europe/Berlin /mnt/etc/localtime
echo "$hostname" > /mnt/etc/hostname
echo -e "127.0.0.1\tlocalhost" >>/mnt/etc/hosts
echo -e "127.0.1.1\t$hostname" >>/mnt/etc/hosts
echo -e "\n::1\tlocalhost" >>/mnt/etc/hosts
# Propagate the systemd-resolved managed configuration to all clients (stub mode)
ln -sf /run/systemd/resolve/stub-resolv.conf /mnt/etc/resolv.conf
cat >/mnt/etc/systemd/network/20-wired.network <<EOF
[Match]
Name=en*
[Network]
DHCP=yes
[DHCPv4]
RouteMetric=10
UseDomains=true
[IPv6AcceptRA]
RouteMetric=10
UseDomains=yes
EOF
cat >/mnt/etc/systemd/network/25-wireless.network <<EOF
[Match]
Name=wl*
[Network]
DHCP=yes
[DHCPv4]
RouteMetric=20
UseDomains=true
[IPv6AcceptRA]
RouteMetric=20
UseDomains=yes
EOF
mkdir -p /mnt/etc/iwd
cat >/mnt/etc/iwd/main.conf <<EOF
[General]
EnableNetworkConfiguration=true
[Network]
EnableIPv6=true
EOF
arch-chroot /mnt systemctl enable systemd-timesyncd fstrim.timer systemd-networkd systemd-resolved iwd
cat >/mnt/etc/mkinitcpio.conf <<EOF
MODULES=(i915)
BINARIES=(/usr/bin/btrfs)
FILES=()
HOOKS=(base consolefont udev autodetect keyboard keymap modconf block encrypt filesystems fsck shutdown)
EOF
arch-chroot /mnt mkinitcpio -p linux
arch-chroot /mnt arch-secure-boot initial-setup
echo -e "\n### Configuring swap file"
swap_size=$(free --mebi | awk '/Mem:/ {print $2}')
swap_end=$(( $swap_size + 129 + 1 ))MiB
truncate -s 0 /mnt/swap/swapfile
chattr +C /mnt/swap/swapfile
btrfs property set /mnt/swap/swapfile compression none
fallocate -l $swap_end /mnt/swap/swapfile
chmod 600 /mnt/swap/swapfile
mkswap /mnt/swap/swapfile
echo "/swap/swapfile none swap defaults 0 0" >> /mnt/etc/fstab
echo -e "\n### Creating user"
arch-chroot /mnt useradd -m "$user"
for group in wheel network video audio input storage power; do
arch-chroot /mnt groupadd -rf "$group"
arch-chroot /mnt gpasswd -a "$user" "$group"
done
echo "$user:$password" | arch-chroot /mnt chpasswd
echo -e "\n### Disabling root login"
arch-chroot /mnt passwd -dl root
echo -e "\n### Setting permissions on the custom repo"
arch-chroot /mnt chown -R "$user:$user" "/var/cache/pacman/${user}-local/"
echo -e "\n### Cloning dotfiles"
arch-chroot /mnt sudo -u $user bash -c 'git clone --recursive https://code.strobeto.de/strobeltobias/dotfiles.git ~/.dotfiles'
echo -e "\n### Running initial setup"
arch-chroot /mnt /home/$user/.dotfiles/setup-system.sh
arch-chroot /mnt sudo -u $user /home/$user/.dotfiles/setup-user.sh
echo -e "\n### DONE - reboot and re-run both ~/.local/share/chezmoi/setup-*.sh scripts"

View file

@ -63,6 +63,9 @@ echo "=========================="
echo "Setting up /etc configs..." echo "Setting up /etc configs..."
echo "==========================" echo "=========================="
copy "etc/kernel/cmdline"
copy "etc/sysctl.d/20-quiet-printk.conf"
copy "etc/modprobe.d/i915.conf"
#copy "etc/aurutils/pacman-x86_64.conf" #copy "etc/aurutils/pacman-x86_64.conf"
#copy "etc/bluetooth/main.conf" #copy "etc/bluetooth/main.conf"
#copy "etc/conf.d/snapper" #copy "etc/conf.d/snapper"
@ -170,5 +173,19 @@ fi
echo "Configuring NTP" echo "Configuring NTP"
timedatectl set-ntp true timedatectl set-ntp true
#echo "Configuring aurutils" echo "Configuring aurutils"
#ln -sf /etc/pacman.conf /etc/aurutils/pacman-maximbaz-local.conf ln -sf /etc/pacman.conf /etc/aurutils/pacman-tobias-local.conf
echo "Configuring plymouth"
plymouth-set-default-theme -R spinner && arch-secure-boot generate-efi
echo "Preparing KeyTool to allow install PK key"
mkdir -p /efi/EFI/secureboot
sbsign --key /etc/arch-secure-boot/keys/db.key --cert /etc/arch-secure-boot/keys/db.crt --output /efi/EFI/secureboot/KeyTool-signed.efi /usr/share/efitools/efi/KeyTool.efi
cp /etc/secureboot/keys/PK/PK.auth /efi/EFI/secureboot/PK.auth
mount="$(findmnt -n -o SOURCE -T "/efi")"
partition="${mount##*[!0-9]}"
entry="/EFI/secureboot/KeyTool-signed.efi"
efibootmgr -d "$mount" -p "$partition" -c -l "${entry//\//\\}" -L "KeyTool"
echo "Reboot into KeyTool and install PK key (EFI/secureboot/PK.auth) to UEFI"

223
setup-user.sh Executable file
View file

@ -0,0 +1,223 @@
#!/bin/bash
set -e
exec 2> >(while read line; do echo -e "\e[01;31m$line\e[0m"; done)
MY_PGP_KEY_ID="A3F9CE82F38FC1F220CC2A1D63CCF3229371555E"
dotfiles_dir="$(
cd "$(dirname "$0")"
pwd
)"
cd "$dotfiles_dir"
link() {
orig_file="$dotfiles_dir/$1"
if [ -n "$2" ]; then
dest_file="$HOME/$2"
else
dest_file="$HOME/$1"
fi
mkdir -p "$(dirname "$orig_file")"
mkdir -p "$(dirname "$dest_file")"
rm -rf "$dest_file"
ln -s "$orig_file" "$dest_file"
echo "$dest_file -> $orig_file"
}
is_chroot() {
! cmp -s /proc/1/mountinfo /proc/self/mountinfo
}
systemctl_enable_start() {
echo "systemctl --user enable --now "$1""
systemctl --user enable --now "$1"
}
#echo "==========================="
#echo "Setting up user dotfiles..."
#echo "==========================="
#link ".gnupg/$(cut -d'-' -f1 /etc/hostname)-gpg.conf" ".gnupg/gpg.conf"
#link ".gnupg/gpg-agent.conf"
#link ".ignore"
#link ".magic"
#link ".p10k.zsh"
#link ".p10k.zsh" ".p10k-ascii-8color.zsh"
#link ".zprofile"
#link ".zsh-aliases"
#link ".zshenv"
#link ".zshrc"
#
#link ".config/bat"
#link ".config/chromium-flags.conf"
#link ".config/environment.d"
#link ".config/flashfocus"
#link ".config/git/$(cut -d'-' -f1 /etc/hostname)" ".config/git/config"
#link ".config/git/common"
#link ".config/git/home"
#link ".config/git/ignore"
#link ".config/git/work"
#link ".config/gtk-3.0"
#link ".config/htop"
#link ".config/imapnotify/archlinux.conf"
#link ".config/imapnotify/maximbaz.conf"
#link ".config/kak"
#link ".config/kak-lsp"
#link ".config/kitty"
#link ".config/libinput-gestures.conf"
#link ".config/mako"
#link ".config/mimeapps.list"
#link ".config/mpv"
#link ".config/neomutt/colors"
#link ".config/neomutt/mailcap"
#link ".config/neomutt/neomuttrc"
#link ".config/neomutt/signature"
#link ".config/notmuch"
#link ".config/pacman"
#link ".config/pgcli/config"
#link ".config/pylint"
#link ".config/qalculate/qalc.cfg"
#link ".config/qalculate/qalculate-gtk.cfg"
#link ".config/qutebrowser"
#link ".config/repoctl"
#link ".config/sclirc"
#link ".config/stylua"
#link ".config/swappy"
#link ".config/sway"
#link ".config/swaylock"
#link ".config/systemd/user/backup-packages.service"
#link ".config/systemd/user/backup-packages.timer"
#link ".config/systemd/user/battery-low-notify.service"
#link ".config/systemd/user/mbsync.service"
#link ".config/systemd/user/mbsync.timer"
#link ".config/systemd/user/polkit-gnome.service"
#link ".config/systemd/user/qutebrowser-update-useragent.service"
#link ".config/systemd/user/qutebrowser-update-useragent.timer"
#link ".config/systemd/user/sway-autoname-workspaces.service"
#link ".config/systemd/user/sway-inactive-window-transparency.service"
#link ".config/systemd/user/sway-session.target"
#link ".config/systemd/user/swayr.service"
#link ".config/systemd/user/systembus-notify.service"
#link ".config/systemd/user/udiskie.service"
#link ".config/systemd/user/waybar.service"
#link ".config/systemd/user/waybar-updates.service"
#link ".config/systemd/user/waybar-updates.timer"
#link ".config/systemd/user/wl-clipboard-manager.service"
#link ".config/systemd/user/wlsunset.service"
#link ".config/tig"
#link ".config/transmission/settings.json"
#link ".config/udiskie"
#link ".config/USBGuard"
#link ".config/user-tmpfiles.d"
#link ".config/vimiv"
#link ".config/waybar"
#link ".config/wldash"
#link ".config/xdg-desktop-portal-wlr"
#link ".config/xkb"
#link ".config/xplr"
#link ".config/zathura"
#
#link ".local/bin"
#link ".local/share/applications"
#link ".local/share/qutebrowser/greasemonkey"
#link ".local/share/dbus-1/services/fr.emersion.mako.service"
if is_chroot; then
echo >&2 "=== Running in chroot, skipping user services..."
else
echo ""
echo "================================="
echo "Enabling and starting services..."
echo "================================="
systemctl --user daemon-reload
systemctl_enable_start pipewire
systemctl_enable_start pipewire-pulse
#systemctl_enable_start "backup-packages.timer"
#systemctl_enable_start "battery-low-notify.service"
#systemctl_enable_start "flashfocus.service"
#systemctl_enable_start "libinput-gestures.service"
#systemctl_enable_start "mako.service"
#systemctl_enable_start "polkit-gnome.service"
#systemctl_enable_start "qutebrowser-update-useragent.timer"
#systemctl_enable_start "sway-autoname-workspaces.service"
#systemctl_enable_start "sway-inactive-window-transparency.service"
#systemctl_enable_start "swayr.service"
#systemctl_enable_start "systembus-notify.service"
#systemctl_enable_start "systemd-tmpfiles-setup.service"
#systemctl_enable_start "udiskie.service"
#systemctl_enable_start "waybar.service"
#systemctl_enable_start "waybar-updates.timer"
#systemctl_enable_start "wl-clipboard-manager.service"
#systemctl_enable_start "wlsunset.service"
#systemctl_enable_start "wluma.service"
#systemctl_enable_start "yubikey-touch-detector.socket"
#if [[ $HOSTNAME == home-* ]]; then
# if [ -d "$HOME/.mail" ]; then
# systemctl_enable_start "mbsync.timer"
# systemctl_enable_start "goimapnotify@archlinux.service"
# systemctl_enable_start "goimapnotify@maximbaz.service"
# else
# echo >&2 -e "
# === Mail is not configured, skipping...
# === Consult \$MBSYNC_CONFIG for initial setup, and then sync everything using:
# === while ! mbsync -c "\$MBSYNC_CONFIG" -a; do echo 'restarting...'; done
# "
# fi
#fi
fi
echo ""
echo "======================================="
echo "Finishing various user configuration..."
echo "======================================="
#echo "Configuring MIME types"
#file --compile --magic-file "$HOME/.magic"
if ! gpg -k | grep "$MY_PGP_KEY_ID" > /dev/null; then
echo "Importing my public PGP key"
curl -s --tlsv1.3 https://tobias.strobel.one/pubkey.txt | gpg --import
echo "5\ny\n" | gpg --command-fd 0 --no-tty --batch --edit-key "$MY_PGP_KEY_ID" trust
fi
find "$HOME/.gnupg" -type f -not -path "*#*" -exec chmod 600 {} \;
find "$HOME/.gnupg" -type d -exec chmod 700 {} \;
#if is_chroot; then
# echo >&2 "=== Running in chroot, skipping YubiKey configuration..."
#else
# if [ ! -s "$HOME/.config/Yubico/u2f_keys" ]; then
# echo "Configuring YubiKey for passwordless sudo (touch it now)"
# mkdir -p "$HOME/.config/Yubico"
# pamu2fcfg -umaximbaz > "$HOME/.config/Yubico/u2f_keys"
# fi
#fi
#if [ -d "$HOME/.password-store" ]; then
# echo "Configuring automatic git push for pass"
# echo -e "#!/bin/sh\n\npass git push" > "$HOME/.password-store/.git/hooks/post-commit"
# chmod +x "$HOME/.password-store/.git/hooks/post-commit"
#else
# echo >&2 "=== Password store is not configured yet, skipping..."
#fi
#if is_chroot; then
# echo >&2 "=== Running in chroot, skipping GTK file chooser dialog configuration..."
#else
# echo "Configuring GTK file chooser dialog"
# gsettings set org.gtk.Settings.FileChooser sort-directories-first true
#fi
#echo "Ignoring further changes to often changing config"
#git update-index --assume-unchanged ".config/transmission/settings.json"
#echo "Configure repo-local git settings"
#git config user.email "code@strobel.one"
#git config user.signingkey "$MY_PGP_KEY_ID"
#git config commit.gpgsign true
#git remote set-url origin "git@github.com:maximbaz/dotfiles.git"